If you’re reading this article right now, chances are that you own a Blink Mini Camera and perhaps, resetting it may have crossed your mind at some point. Maybe the device isn’t working correctly, or you want to give it to someone else to use, but all of these reasons require one thing: To know where the reset button is located.
Well, no need to worry anymore! In this article, we will provide all the information you need on where to find the Reset Button on the Blink Mini Camera so that you can get your device back in operation without any fuss.
“Knowing the location of the reset button can be essential when your camera stops functioning due to technical issues.”
The Blink Mini Camera has taken the market by storm since its release, thanks to its incredible features like motion detection, two-way audio, night vision function, among others. However, just like any other electronic gadget out there, things can go wrong; hence, knowing where to find the reset button is crucial as it can save you from frustration and unnecessary expenses.
This guide aims to answer one simple question: Where Is Reset Button On Blink Mini Camera?
If you’re ready to learn this valuable piece of information, keep reading, and you’ll master how to do so in no time!
Table of Contents
Locating the Reset Button
Resetting your Blink Mini camera may become necessary if you encounter connection problems or need to change Wi-Fi networks. The reset button is usually hardwired into the device and restores it to its original factory settings.
If you are wondering where the reset button on the Blink Mini camera is located, there are a few places you can check:
Checking the User Manual
“Always read the user manual before handling any electronic device.” -Unknown
The first place to look when searching for the Blink Mini camera’s reset button is the user manual that came with your device. The manual usually provides an overview of the location of all different buttons, including the reset button. You will also find step-by-step instructions on how to reset the camera back to factory default settings.
In case you have misplaced the user manual, you can easily download one from the official Blink website. Just visit their support page and navigate to the section that provides documentation for your specific product version.
Looking for the Reset Button on the Blink Mini Camera
“When in doubt, start by observing.” -Jane Goodall
The second way to locate the reset button on your Blink Mini camera is by visually inspecting the device itself. On the bottom of the camera, right next to the Micro-USB port, you should be able to see a small circular hole. This is most likely the location of the reset button. However, since manufacturers use different methods, this information isn’t always accurate.
You might also spot some tiny lettering around the camera body, indicating the position of the reset button. A magnifying glass could come in handy when trying to identify these details.
Searching Online for Instructions on How to Reset the Blink Mini Camera
“Google is your friend.” -Unknown
If you’re still unsure about where the reset button of your Blink Mini camera is located, don’t worry. You can always search online for information and guidance. The internet has a wealth of helpful resources that could help you find what you need.
Type in keywords such as “resetting Blink Mini camera” or “finding reset button on Blink Mini camera,” and you’ll receive an array of different articles discussing the topic in detail. Many tech support websites also provide detailed guides on how to locate the buttons and perform hard resets.
If you prefer video tutorials, YouTube may be a great source of valuable information as well. There are plenty of videos out there showing the precise location of the reset button on the Blink Mini camera and how to use it step by step.
- Always read the user manual before handling any electronic device.
- When in doubt, start by observing.
- Google is your friend.
Finding the reset button on your Blink Mini camera doesn’t have to be complicated. Checking the user manual, visually inspecting the device, or searching online can all point you in the right direction. If at any point, you feel lost or stuck, remember that customer service is only a call away.
Why Reset the Blink Mini Camera?
Fixing Connection Issues
If you’re experiencing connection issues with your Blink Mini camera, resetting it might help solve the problem. A reset will force the camera to reconnect to your Wi-Fi network and update any other settings that may have been disrupted. This can be particularly useful if your camera is disconnecting from time to time or not showing live video feed at all.
Before resetting the Blink Mini camera, make sure that there are no issues with your Wi-Fi signal. Check if other devices connected to the network are having problems too. If the issue persists even after the reset, consider moving the camera closer to your router or getting a Wi-Fi extender for better coverage.
“Resetting the Blink Mini could fix minor connection issues caused by misconfiguration or level of interference.” -Ben Keough, Techwalla
Resolving Camera Malfunction
If your Blink Mini camera has stopped working entirely, or if it’s acting peculiarly (such as flashing red lights uncontrollably), resetting could resolve the issue. As with many electronic devices, sometimes a quick reboot is all it takes to rectify any malfunctioning software or hardware components.
To reset the Blink Mini camera, locate the small round button on the back of the camera. Press and hold the button down for about 15-20 seconds until the LED light turns solid blue and then releases the button. Wait for the light to start blinking blue again before using the camera.
“If anything goes wrong with your Blink Mini, pressing the reset button helps in most cases. It reboots the device and clears any temporary glitch that has affected its performance.” -Aju Mathew, CameraSpies.com
How to Reset Blink Mini Camera
Pressing and Holding the Reset Button
If you are wondering where is reset button on Blink Mini camera, it’s located at the bottom of the camera. You may need to use a thin pin or paper clip to press the button in order to reset your device.
Keep in mind that resetting the Blink Mini camera will erase all the settings you have configured for the device. To proceed with this method:
- Unplug the camera from the power source.
- Locate the reset button.
- Use a thin object like a paperclip or a pin, insert it into the small hole beneath the camera.
- Hold down the reset button for about 10 seconds until the LED light blinks blue.
- Release the button once the LED turns solid white.
Your Blink Mini camera has now been reset to its default factory settings.
Using the Blink App to Reset the Camera
You can also use the Blink app to reset your Blink Mini camera to its default factory settings by following these simple steps:
- Open the Blink app on your smartphone or tablet.
- Select the Blink Mini camera you want to reset.
- Click on “Settings” located at the bottom-right corner of the screen.
- Select “Advanced Settings” and then click on “Reset to Factory Defaults.”
- Wait for the process to complete.
- The Blink Mini camera will restart automatically and you will need to set it up again from scratch.
Please note that resetting your camera is different from removing a device or deleting it from the Blink app. If you want to remove a device, select the “Remove” option instead of “Reset to Factory Defaults.”
“It’s always good practice to keep a backup of your camera settings in case you accidentally reset your device.”
Remember that resetting your Blink Mini camera should be done only if you are experiencing issues with your device or want to return it to its original state. Try other troubleshooting methods first before resorting to this solution, as it may cause undesired consequences like data loss or inability to connect to the internet.
With these two methods on how to reset Blink Mini Camera, you can easily restore your device back to its initial state. Always make sure to follow the correct steps accordingly and avoid any unnecessary complications.
Issues that can be Fixed with a Reset
Camera Not Connecting to Wi-Fi
If your Blink Mini camera is not connecting to your Wi-Fi, one of the first troubleshooting steps you should take is resetting the device. The reset process will erase any previous network settings and allow the Blink Mini camera to connect to the Wi-Fi network again.
To reset the Blink Mini camera, locate the small reset button on the bottom of the device. Use a paperclip or a similar object to press and hold the button for 10 seconds until the LED light turns off and then back on.
Once the camera has been reset, go through the setup process again in the Blink app and ensure that you enter the correct Wi-Fi network details and password.
Camera Not Recording
If your Blink Mini camera isn’t recording footage like it should, a reset could help resolve the issue. By resetting the camera, you can clear away any software glitches that may be causing the problem.
First, reboot the camera by unplugging it from its power source and plugging it back in after 10 seconds. If this doesn’t solve the issue, try pressing and holding the reset button on the bottom of the camera for 10 seconds and releasing it. This will reset the firmware on the camera and should get it working properly again.
Camera Failing to Respond to Commands
If you find that your Blink Mini camera stops responding to commands from the Blink app or remote control, resetting the device may be necessary to get it to start functioning normally again.
The first thing to do is check your battery level in the Blink app and see if there are any connectivity issues. If nothing is amiss there, try restarting the camera by unplugging it from its power source and plugging it back in after 10 seconds.
If the problem persists, press and hold the reset button on the bottom of the camera for at least 10 seconds to initiate a factory reset. This should bring the camera back to its default settings and allow you to start over with setup if necessary.
Alternative Solutions to Common Blink Mini Camera Problems
Adjusting Camera Placement
If you’re having difficulty accessing your Blink Mini camera reset button, it could be that the positioning of the device is not effective. Often due to limited space or wrong placement in a quick hurry, cameras can end up placed too high, low, or with their view obstructed by an object rendering their optimal functionalities ineffective. In such cases adjusting the camera’s position may help access the reset button and also ensure better monitoring.
The best place for your camera is at eye level as pointed out by Security.org’s article on “Where Should You Place Your Home Security Cameras?” By placing your camera strategically, you make it possible to capture footage at an ideal angle without any distortions and avoid recording unwanted footages. Placing your camera somewhere around five feet above ground is advisable if you want your camera to come pre-equipped with crystal clear views.
Updating the Camera Firmware
An outdated firmware can lead to the Blink mini camera becoming dysfunctional leading to errors including inability to use or access various features such as the reset button when needed. The good news is you can fix some of these common issues like locating the reset button by updating your camera firmware regularly to keep it running smoothly and efficiently.
To update your Blink Mini camera firmware means getting software updates which will iron out bugs and other smaller glitches giving the system more power to maximize its capabilities. According to TechHive’s residential security guide for 2021, firmware upgrades ensures functionality while unlocking new features aimed at enhancing efficiency. In order to upgrade, log into your Blink account and visit the “Manage Account” section. Then locate your device and click on “Device Settings”. Scroll down and click on “Upgrade Firmware”. This should apply the available latest version updates and resolve any issues you may have had with your device including access to the reset button.
Frequently Asked Questions
Where is the reset button located on Blink Mini camera?
The reset button on the Blink Mini camera is located on the bottom of the device. You will need to use a small tool, such as a paperclip or pin, to press and hold the button for at least 10 seconds.
How do I reset my Blink Mini camera?
To reset your Blink Mini camera, locate the reset button on the bottom of the device. Use a small tool, such as a paperclip or pin, to press and hold the button for at least 10 seconds. The camera’s LED light will turn off and then back on, indicating a successful reset.
What should I do if my Blink Mini camera is not working properly?
If your Blink Mini camera is not working properly, try resetting the device by pressing and holding the reset button for at least 10 seconds. If the issue persists, check your Wi-Fi connection and ensure that your camera is within range. You may also need to contact customer support for further assistance.
Is there a specific way to press the reset button on Blink Mini camera?
To reset your Blink Mini camera, use a small tool, such as a paperclip or pin, to press and hold the reset button located on the bottom of the device for at least 10 seconds. Be sure to hold the button down until the camera’s LED light turns off and then back on.
Can I reset my Blink Mini camera remotely?
No, you cannot reset your Blink Mini camera remotely. You will need to physically locate the reset button on the bottom of the device and press and hold it for at least 10 seconds to reset the camera.
What happens when I press the reset button on my Blink Mini camera?
When you press and hold the reset button on your Blink Mini camera for at least 10 seconds, the camera’s LED light will turn off and then back on, indicating a successful reset. All settings and configurations will be erased and the camera will be restored to its default settings.