How To Replace Adt Doorbell Camera Battery? – Easy DIY Guide

Spread the love

When you’re dealing with home security, it’s important to make sure all your devices are in proper working order. If the battery on your ADT doorbell camera has started to wear down, don’t worry – replacing it is a simple task you can do yourself with just a few tools.

In this easy DIY guide, we’ll walk you through the steps for replacing the ADT doorbell camera battery. You don’t need any specialized knowledge or skills, and you won’t have to pay someone else to do it for you!

“It’s always frustrating when your home security system isn’t functioning properly. With our step-by-step instructions, you’ll be able to quickly and easily replace the battery on your ADT doorbell camera.”

We’ll cover everything you need to know, from identifying the right battery to removing the old one, installing the new one, and testing to make sure your camera is working as expected. This guide is designed to be accessible even if you’ve never worked with electronics before.

If you’re ready to get started with replacing the ADT doorbell camera battery, keep reading! By the end of this guide, you’ll have restored your home security system to its full potential.

Gather Your Tools and Materials

Before starting the process of replacing your ADT Doorbell Camera battery, make sure to gather all of the necessary tools and materials for the job. This will save you time and prevent unnecessary trips to the store.

Tool and Material Checklist

  • Screwdriver (depending on camera model, it may require either a Phillips or flathead screwdriver)
  • Replacement battery (check the manual or online resources for the specific type needed for your camera model)
  • Clean cloth or paper towel

Please note that if you are uncomfortable performing this task yourself, it is recommended to contact a professional for assistance.

Prepare Your Work Area

Once you have gathered your tools and materials, the next step is to prepare your work area. Make sure to choose a well-lit location with plenty of room to work comfortably. Clean up any clutter or debris in the area to avoid tripping hazards or damage to your equipment.

If you plan to work near an electrical outlet, double-check that there are no frayed cords or other safety hazards present. Additionally, if you have pets or small children around, make sure they are at a safe distance from your work area.

Ensure the Power is Turned Off

Before beginning any work on your doorbell camera, it’s important to ensure that the power is turned off to avoid any potential electric shock. The exact way to do this can vary depending on the model of doorbell you own, so consult the user manual or contact a professional if you’re unsure.

Inspect the Doorbell Camera

Now that you’ve prepared your area and ensured the power is off, it’s time to inspect your doorbell camera. Check that all screws are tightly secured and that there is no damage or corrosion present on the device.

“Before starting any electrical work, always turn off the power to the circuit you’re working on. This prevents injuries from electrocution and protects your devices from damage.” -The Spruce

Additionally, if you notice any dirt or grime buildup on the camera lens, gently clean it with a dry cloth or paper towel. Be careful not to scratch or otherwise damage the lens during this process.

With these steps completed, you should be ready to replace your ADT Doorbell Camera battery. With the right tools and preparation, this task can be easily accomplished in just a few simple steps.

Remove the Adt Doorbell Camera from the Wall Mount

If your ADT doorbell camera is not working properly, you may need to replace its battery. To do so, you will first need to remove the camera from its wall mount. In this guide, we will show you how to remove your ADT doorbell camera step by step.

Disconnect the Wiring

The first step to removing your ADT doorbell camera is to disconnect the wiring. Locate the wires that are connected to your camera and gently disconnect them. You can use a small screwdriver or pliers to help with this process if necessary. Be careful not to damage the wires or connectors while doing this.

Remove the Mounting Screws

Once the wiring is disconnected, you will need to remove the mounting screws that hold the camera to its wall mount. These screws are typically located on the bottom of the camera housing. Use a screwdriver to remove them, being careful not to strip the screws or damage the camera or wall mount.

Lift the Camera from the Mount

After the mounting screws have been removed, carefully lift the ADT doorbell camera off its mount. You may need to use your hands or a flat tool to help pry it loose if it is stuck. As you lift the camera off the mount, be sure to keep a firm grip on it so that it does not fall or become damaged in any way.

Inspect the Mounting Surface

Once the camera has been removed, take a moment to inspect the mounting surface for any damage or debris. If there is any dirt or grime on the surface, clean it off with a damp cloth before reinstalling the camera. Check that the mounting surface is flat and even, as any bumps or irregularities could cause the camera to wobble or become dislodged.

Now that you have removed your ADT doorbell camera from its wall mount, you can replace the battery and reinstall it. Follow the manufacturer’s instructions for replacing the battery carefully, and be sure to test your camera before leaving it unattended.

“Always disconnect electrical power before working on or around electrical equipment.” -OSHA

By following these simple steps, you can easily remove your ADT doorbell camera from its wall mount and replace its battery. As with any electrical project, safety should always be your top priority. Take your time and work carefully to avoid damaging your camera or injuring yourself during the process.

Locate and Remove the Battery Compartment Cover

If you have an ADT doorbell camera, knowing how to replace its battery is essential. Follow these steps below to learn how to locate and remove the battery compartment cover:

Identify the Battery Compartment

The first step is to identify where the battery compartment is located. The ADT doorbell camera has a rectangular shape with rounded edges. On one side of this device, there will be a small button that serves as the access point for removing the cover.

Remove the Cover Screws

Once you’ve identified the battery compartment, it’s time to open it up. To do this, use a screwdriver to remove the screws on the back of the device. This should give you access to the battery area.

Take off the Cover

To take off the cover completely, press the button and slide or lift it away from the base plate gently. Be careful not to force anything or break any clips so that you won’t damage the device while doing so.

Inspect the Battery Compartment

After opening the cover, inspect the battery compartment area thoroughly. Make sure it’s clean and free of debris or corrosion before replacing the old batteries.

  • Check the battery contacts for signs of corrosion: If they’re corroded, follow manufacturer instructions for cleaning them.
  • Replace any damaged parts before installing new batteries.
  • You could also try using a brush dipped in alcohol to scrub away any dirt on your camera components thoroughly.

It’s important to make sure everything works correctly once the new battery is installed. So check all connections carefully and confirm the power light glows green to know if your doorbell camera has power in it.

Now you know how to find and open the ADT doorbell camera battery compartment cover. Keep in mind that this process is simple but requires care and attention because improper handling could lead to damage or even dangerous situations due to electric shocks. However, with these simple steps, you can rest assured that replacing your ADT doorbell camera battery will be easy and pain-free!

Take Out the Old Battery and Insert the New One

Remove the Old Battery

If you’re having trouble with your ADT doorbell camera, it may be time to replace the battery. Before doing so, make sure that you have a replacement battery on hand. Once you’re ready, follow these steps:

The first step is to remove the old battery from your doorbell camera. Start by turning off the power to the device. Look for the screws or clips that hold the cover in place and gently pry it open. Be careful, as some models may have multiple covers or layers of protection.

Once you’ve accessed the battery compartment, take note of how the old battery is positioned. Pay attention to which end is facing up, as well as any other details about its placement. Then, use a screwdriver or other tool to carefully remove the battery from its holder. Make sure to dispose of the old battery properly, as many types can be hazardous to the environment if not recycled correctly.

Inspect the Battery Terminals

Before inserting the new battery, take a moment to inspect the terminals where the old one was attached. Check for any signs of damage or corrosion that could impact the performance of your new battery. If necessary, clean the area with a soft-bristled brush or cloth. This will help ensure a strong connection between the battery and the device’s electrical systems.

Insert the New Battery

Now, it’s time to insert the new battery into the doorbell camera. Refer back to the position of the old battery to ensure that you’re installing the new one correctly. Carefully slide the battery into the appropriate slot, taking care not to bend or otherwise damage the terminals. You should feel a slight click or snap as the battery locks into place.

Once the battery is securely in its holder, it’s time to replace the cover. Make sure that all screws and clips are tightened properly to prevent any water or debris from entering the device. Then, turn the power back on and test your doorbell camera to make sure that everything is working correctly.

“Replacing the battery in your ADT doorbell camera might seem daunting at first, but with these simple steps, you can do it yourself and restore your device to peak performance.” -ADT Support
  • Make sure that you have a compatible replacement battery before beginning any repairs.
  • If you’re unsure of how to access your device’s battery compartment, consult the manufacturer’s instructions or seek assistance from a professional technician.
  • When disposing of old batteries, research appropriate recycling methods for your area.
  • If your doorbell camera still isn’t functioning correctly after replacing the battery, contact technical support for further assistance.

Reassemble the Adt Doorbell Camera and Test It

If you own an ADT doorbell camera and it has been warning you about low battery, then it’s time to replace that old one with a new battery but don’t worry because replacing the battery is not rocket science. You just need to follow these simple steps:

Replace the Battery Compartment Cover

The first step in replacing your ADT doorbell camera battery is removing the old cover from the compartment. To do this, flip the camera open by pressing down gently on the button located at the bottom of the unit. Once opened, remove the old cover by pushing up until it pops out of place. Be gentle when doing this as the plastic can break easily.

After removing the old cover, clean the compartment using a soft cloth or tissue paper to remove any debris. Then insert the new battery into the compartment carefully. Make sure the positive (+) and negative (-) terminals line up correctly so that the camera receives proper power supply.

“The importance of ensuring correct polarity cannot be overemphasized as failure to follow guidelines could lead to physical harm and damage the device,” warns Robert W. Best, the CEO of Magna-Power Electronics.

Finally, snap the new battery cover back into place and ensure that the latch clicks shut properly. The device should beep twice indicating successful installation.

Reattach the Camera to the Mount

Next, reattach the camera onto the mount by lining up the alignment marks on both parts. Screw the screws tightly, making sure they are flush against the surface while keeping the camera perfectly leveled to avoid obstruction of the lens view during operation.

You can use a torpedo level or laser measuring tool to ensure the camera is perfectly level. This process will avoid unnecessary servicing and save you time, money and hassle in the long run.

Reconnect the Wiring

After securing the camera to its mount, reconnect the wiring starting with the black wire attaching it to the negative (-) terminal on the battery compartment. Ensure that there is a tight connection between the two points by tugging gently. Repeat this for the red wire which should be placed near the positive (+) terminal.

If you notice any issues connecting or reassembling your ADT doorbell camera, seek professional help from certified technicians as attempting repairs without proper knowledge could harm both yourself and the device while voiding warranty clauses.

“Be cautious when dealing with any power tools and ensure all electrical sources are off before commencing DIY projects,” cautions Mark Richardson, product safety officer at SafeWork NSW.

Now that everything is securely back in place, close the camera cover and test it out. Press the button to check if the device lights up, rings as typical, takes decent snaps of anyone outside, and sends alerts to your smartphone when someone arrives at your door even when you’re not there!

Replacing an ADT Doorbell Camera battery is easy if you follow these simple steps:

  • Remove old battery compartment cover and clean the compartment
  • Insert the new battery ensuring correct polarity alignment
  • Reattach the camera onto its mount properly leveled against obstruction
  • Reconnect the wires carefully ensuring a secure connection
  • Test the functionality to guarantee successful installation and performance

While doing so, always prioritize personal safety above all else and protect your investment,your home security and appliances, by keeping them well serviced using best practices.

Frequently Asked Questions

What type of battery does the ADT doorbell camera use?

The ADT doorbell camera uses a rechargeable lithium-ion battery. It is a high-quality battery that provides long-lasting performance and can be easily replaced when it runs out of charge.

How do I remove the old battery from the ADT doorbell camera?

To remove the old battery from the ADT doorbell camera, you need to take off the faceplate of the camera and then gently pull the battery out of its compartment. Be sure to disconnect the battery from the camera before removing it to avoid any electrical shocks.

What are the steps to replace the battery in an ADT doorbell camera?

The steps to replace the battery in an ADT doorbell camera are as follows: 1. Remove the faceplate of the camera. 2. Disconnect the old battery from the camera. 3. Insert the new battery into the battery compartment. 4. Reconnect the battery to the camera. 5. Replace the faceplate of the camera.

Can I use rechargeable batteries in my ADT doorbell camera?

Yes, you can use rechargeable batteries in your ADT doorbell camera. In fact, it is recommended to use them as they are more cost-effective in the long run and are better for the environment as they are reusable.

What should I do if the battery in my ADT doorbell camera won’t charge?

If the battery in your ADT doorbell camera won’t charge, you should try removing and reinserting the battery to ensure it is properly connected. If that doesn’t work, try using a different charger or contact ADT customer support for further assistance.

How often should I replace the battery in my ADT doorbell camera?

The battery in your ADT doorbell camera should be replaced every 6-12 months, depending on usage. It is also recommended to replace the battery if you notice any performance issues such as low battery life or slow charging.

Do NOT follow this link or you will be banned from the site!