How do I set white balance on Nikon D800?

What should my camera settings be for a wedding?

For wedding couples portrait photography, you’ll need an aperture somewhere between f/1.4 and f/2.8. When you photograph the wedding venue and wide shots the guests, you can consider using a higher aperture value.

What focus mode should I use for weddings?

Most professional wedding filmmakers swear by manual focus and they’ll never turn to the automatic function of their DSLR camera (or whatever other piece of equipment they’re using). Automatic focus systems may be good for photos but they tend to be sluggish when you’re trying to capture video.

What is the best shutter speed for wedding photography?

For weddings and hand-holding images, we’d recommend a shutter speed of 1/100th of a second or faster. A slower shutter speed is quite the opposite. With a slower shutter speed, you’re allowing your camera’s shutter to open and close at a slower rate. Which may or may not introduce motion blur.

Do you use Flash for wedding photography?

Using Flash at the Reception The main place that wedding flash photography will be used is during the reception. This is because the venues are usually dark or if outdoor, at night, and you will need to add artificial lighting to illuminate your subjects.

Do pro photographers use auto mode?

Many professional photographers work with their cameras in the semi-automatic modes of Aperture Priority or Shutter Priority—modes that share some of the responsibility for exposure with the camera’s computer.

How do I set up my Nikon d800?

How do I change the focus point on my Nikon d800?

How do you set a custom white balance on a Nikon?

To set a custom white balance, simply take a photo of a white sheet of paper or white balance grey card under the same light as your subject while using manual focus mode on your DSLR. Nikon cameras offer a range of pre-set White Balance modes that easily correct the colour temperatures of your images.

How do you shoot a wedding ceremony?

1. SHOOT FROM THE FRONT.
2. MOVE BEHIND THE CEREMONY.
3. STAND ABOVE THE CEREMONY.
4. SHOOT FROM THE SIDE.
5. CAPTURE A LOWER ANGLE.
6. STAND AT THE AISLE END.
7. DOCUMENT THE COUPLE’S PERSPECTIVE.

How do you take indoor wedding pictures?

1. Shoot RAW.
2. High ISO + Black & White = Amazing.
3. Embrace Moody Lighting.
4. Don’t Delete Any Images Immediately.
5. Keep the Continuous Shooting Mode on.
6. Learn How to Bounce Flash & Diffuse Light.
7. Gel Your Flashes.
8. Get Creative With Silhouettes.

What do I need to know about shooting a wedding?

• Timeline.
• Have Backups of Everything!
• Lighting.
• Make Friends (& Learn Names!)
• Second Shoot or Assist.
• Build a Relationship with Your Couple.
• But Still Be Honest with Your Couple.
• Make a list for Family Formals.

How do you photograph a wedding without flash?

How do you take good wedding photos with low light?

When taking Wedding Photos in low light look For Alternate Light Sources. Candles, light streaming through a window and other ambient lights can help you create beautiful shots. You’ll have to get in close to capture the shot, but you can come up with some really unique wedding ideas by using creative light sources.

Which practice can help you capture better photos at a wedding?

A fast shutter speed is a good starting point for wedding photography because you’ll capture lots of movement. For starters, set the shutter speed to 1/200 or faster. Then try shutter priority mode to really freeze moments. Set the shutter speed to 1/500th of a second to capture active moments.

Can you shoot a wedding with one lens?

It takes practice and you need to be comfortable with your gear. This is definitely even more crucial when shooting a wedding where there are a lot of blink-and-you-miss-it moments. At the same time, if you know how to use your gear and understand it’s limitation, there’s a lot you can do with just one lens.

How do you shoot a flash at a wedding?

1. Use Bounce Flash Effect To Minimize Harshness. Direct flash can sometimes lead to harsh lighting and shadows.
2. Soften Your Flash Light With Softboxes.
3. Use Colored Gels To Balance Color Temperature.
4. Use Flash Photography To Add Feeling.
5. Add Motion With A Long Exposure.
6. You Don’t Always Need A Flash.

What mode do most photographers shoot in?

Aperture Priority Mode It is the mode that most hobbyist photographers and even many pro photographers shoot in most of the time. When you shoot aperture priority mode, you set the aperture (the f-stop) and also the ISO. The camera will then set a shutter speed for you so that the picture is properly exposed.

Is it better to shoot in manual or auto?

If you’re new to photography, then consider starting in auto mode until you gain more experience with your camera. The goal is to never miss a shot and if you’re not comfortable changing settings quickly in manual mode, then having the camera set your exposure in real-time is a big help.

What is the best ISO setting for portraits?

For portraits, you want the highest image quality possible. So for the ISO set it as low as you can to avoid excess noise in your photos. Go for somewhere between ISO 100 and 400.

Should I shoot RAW?

The RAW format is ideal if you are shooting with the intent of editing the images later. Shots where you are trying to capture a lot of detail or color, and images where you want to tweak light and shadow, should be shot in RAW.

How do you do long exposure on Nikon D800?

1. Ready the camera. Mount the camera on a tripod or place it on a stable, level surface.
2. Select exposure mode M. Press the I button and rotate the main command dial until M is displayed in the control panel.
3. Choose a shutter speed.
4. Open the shutter.
5. Close the shutter.

Does the Nikon D800 have auto mode?

The D800 features six AF Area modes – single point, 9-point, 21-point, 51-point, 51-point ‘3D’ tracking, and Auto Area mode (shown below). In single-servo autofocus (AF-S) operation only the single and auto modes are available. All other modes require the camera to be set to continuous-servo autofocus (AF-C).

How do you find the shutter count on a Nikon D800?

Instead, you can find it in the photos taken by the camera. Like other digital cameras, the D800 embeds the shutter count of that specific photo in each photo the camera takes. More specifically, it’s in the maker notes section of the EXIF metadata.

How do I change the shutter speed on my Nikon D800?

View the exposure information in the bottom area of the viewfinder or in the control panel. While the meter is activated, use your thumb to roll the Main Command dial left and right to see the changed exposure values. Roll the dial to the right for faster shutter speeds and to the left for slower speeds.